Ford 2014 FUSION HYBRID Owner's Manual page 110

Message
Motor Coolant Overtem-
perature
Power Reduced to
Lower Engine Temp
Service Tire Mobility Kit
Transport / Factory
Mode
See Manual
Oil Maintenance
MyKey
Message
MyKey Not Created
MyKey Active Drive
Safely
Speed Limited to XX
MPH/km/h
Near Vehicle Top Speed
Vehicle at Top Speed of
MyKey Setting
Check Speed Drive
Safely
Buckle Up to Unmute
Audio
Information Displays
Displays when the motor electronics are overheating. Stop
the vehicle as soon as safely possible, turn off the vehicle and
let it cool. If the warning stays on or continues to come on,
contact your authorized dealer as soon as possible.
Displays when the engine has reduced power in order to help
reduce high coolant temperatures.
Displayed when the kit needs service. See your authorized
Displays to indicate that the vehicle is still in Transport or
Factory mode. This may not allow some features to operate
properly. See your authorized dealer.
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
Displays when EV functionality is disabled and the engine is
running to maintain oil quality. See Engine Oil Check (page
Displayed during key programming when MyKey cannot be
Displays when MyKey is active.
Displays when starting the vehicle and MyKey is in use and
the MyKey speed limit is on.
Displays when a MyKey is in use and the MyKey speed limit is
on and the vehicle speed is approaching 80 mph (130 km/h).
Displays when a MyKey is in use and the MyKey speed limit is
Displays when MyKey is active.
Displays when a MyKey is in use and Belt-Minder is activated.
107
Action
dealer.
244).
Action
programmed.
reached.