Makita EA3700T Original Instruction Manual page 19

2. Remove the screw (1). Slowly remove the ratchet wheel (2), damper spring (3)
and reel (4).
3. Remove the old rope from the reel and starter grip.
4. Pass the new rope through the starter grip, and make a knot as illustrated.
5. Pass another end of the rope through the rope guide of the starter case.
6. Pass that end of the rope through the rope guide of the reel, and make a knot. Pull
the rope lightly to place the knot into the reel.
7. Place the reel onto the starter case as the hook on the back of the reel engages
with the hook of the spiral spring.
19
(1)
(2)
(3)
(4)