Connecting Devices - Motorola SCOUT5000 User Manual

4. Connecting Devices

How does it work?
Pet Camera
Wi-Fi
When a user tries to access the Camera, the Hubble server will authenticate the
user's identity before it grants access to the Camera.
Important
Make sure that the battery level is more than 70% or the power adapter is
plugged in before starting installation. To check battery level, see "Camera
Settings" on page 24.
Setup
• Connect the power adapter to an electrical outlet and insert the plug into the
micro USB socket on the Pet Camera.
• Press and hold the POWER KEY
on. When switched on, the LED lights up in solid green and a message
indicating that the device is ready for connection is played.
• The Pet Camera must be within range of the Wi-Fi
want to connect. Make sure that you have the password of the router for the
setup process.
Note
You can only setup via a compatible smart device, such as a smartphone or
tablet, and not via a PC.
Connecting Devices
Access your
Camera locally.
®
Router
Hubble Service
View your Camera from
any compatible device
remotely.
for approximately 3 seconds to switch it
®
router with which you
11