Fender '59 Bassman Instruction Manual page 5

• LINE CORD - The power line cord must be connected to a grounded AC receptacle in accordance
with the voltage and frequency ratings as listed on the rear panel of the amplifier.
TYPE:
PART NUMBER:
DIMENSIONS:
POWER OUTPUT:
INPUT IMPEDANCE:
OUTPUT IMPEDANCE:
POWER REQUIREMENTS:
TUBES:
(Original)
SPEAKER COMPLEMENT:
PR 143
120V US
100V Jpn
230V Euro
230V UK
240V Aust
Height: 22-3/8" (56.8 cm)
Width: 23-1/2" (59.7 cm)
Depth: 10-1/2" (26.7 cm)
Weight: 53 lbs
50W R.M.S. minimum @ 5% THD, 1 kHz
Input 1, both channels: 1MΩ
Input 2, both channels: 136kΩ
2Ω.
100V version: 100V AC 50/60Hz, 270W
120V version: 120V AC 60Hz,
230V version: 230V AC 50Hz,
240V version: 240V AC 50Hz,
Two 5881/6L6 WGC (P/N 039214), Three 7025 (P/N 013341)
GZ34, 5881, 5881, 12AX7, 12AX7, 12AX7
(5AR4)
Four 10" speakers (Fender P/N 036457), with
alnico magnets, paper cones, paper surrounds,
and kraft paper voice coil formers like the original
Bassman speakers
Product specifications are subject to change without notice.
21-7100
21-7170
21-7160
21-7140
21-7130
(24 kg)
270W
270W
270W
5