Declaration Of Conformity - Bosch GSR Mx2Drive Original Instructions Manual

OBJ_BUCH-1208-003.book Page 18 Monday, June 24, 2013 3:19 PM
18 | English

Declaration of Conformity

We declare under our sole responsibility that the product described under "Technical Data"
is in conformity with the following standards or standardisation documents: EN 60745 ac-
cording to the provisions of the directives 2009/125/EC (Regulation 1194/2012),
2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
11.07.2011
Noise/Vibration Information
The measured values of the machine are listed in the table on page 276.
Noise and vibrational values (vector sum of three directions) determined according to
EN 60745.
The vibration emission level given in this information sheet has been measured in accord-
ance with a standardised test given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However
if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such
as: maintain the tool and the accessories, keep hands warm, organise work patterns.
Mounting and Operation
Action
Removing the battery
Inserting the battery
Mounting application tools
Reversing the rotational direction
1 609 92A 0CA | (24.6.13)
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Figure Page
1 277
2 277
3 277
4 278
Bosch Power Tools