Revision:4
WING REMOVAL/INSTALLATION
Removal and installation of the wings requires two people,
one to hold the wing at the tip end and the second person to
hold the stub end of the wing. The person handling the tip
end of the wing must hold the flaperon approximately in trail
as it will tend to flip around and possibly become damaged
when disengaged from the fuselage.
REMOVAL
1. Withdraw each of the fuselage pins only enough to
release the right wing spar.
2. Remove the right wing assembly and set aside.
3. Remove both of the fuselage pins.
4. Remove the left wing and set aside.
INSTALLATION
Installation procedure is reverse of the removal procedure
RV-12 PILOT'S OPERATING HANDBOOK
Date:12/03/14
8-5