Huawei Quidway S3526 Installation Manual page 40

Installation Manual
Quidway S3526 Ethernet Switch
II. System auto-booting
Note:
System will enter the auto-booting status if no operations are performed or no keys except <Ctrl+B> are
keyed in within 5 seconds of appearing " Press Ctrl-B to enter Boot Menu...".
After the auto-booting of the system, the switch will start the decompression:
Auto-booting...
Decompress Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . ..OK!
Starting application now......
User interface Aux0/0 is available
Press ENTER to get started.
Press <Enter> and the terminal display will give the following output.
<Quidway>
Now, you can configure the switch.
Note:
Quidway series switch provides a variety of command modes. For the specific description on the
configuration command and command line interface, see Quidway S3500 Series Ethernet Switches
Operation Manual.
Chapter 5 Booting and Configuration
5-7