Table of Contents
Advertisement
AUTOMATIC HOLD
Station users can enable or disable automatic hold at their keysets. While a user is
engaged on an outside (C.O.) call, pressing another trunk key, route key or CALL
button automatically puts the call on hold when this feature is enabled. Pressing
TRSF, CONFERENCE, PAGE or a DSS key will always automatically place the call
on hold. This type of automatic hold is not a user-selectable option.
AUTOMATIC PRIVACY
All conversations on outside lines and intercom calls are automatically private. The
privacy feature can be turned off on a per-line basis.
BACKGROUND MUSIC
When customer-provided music sources are connected, each keyset user may
listen to background music. The HOLD button turns BGM on or off and the volume
is controlled by the volume control keys. Once source is located in the KSU. A
second source is located on the optional SMISC card.
BUSY STATION CALLBACK
When reaching a busy station, callers may request a callback by pressing one
button or dialing a code. The system rings the caller back when that station be-
comes idle (a system-wide maximum of 100 callbacks are allowed at one time
including busy station and busy trunk).
BUSY STATION INDICATIONS (BLF)
DSS/BLF keys may be assigned to any keyset or add-on module. These buttons
will be off when the station is idle, light red when that station is in use and flash
distinctively when that station is in the DND mode.
CALL FORWARDING
Station users can forward internal and outside calls to other destinations immedi-
ately (Forward All), when busy (Forward Busy) or if not answered in a program-
mable number of seconds (Forward No Answer). These forward destinations can
all be different. Once a destination has been programmed, it can be turned on and
off with a programmable key. Forward All takes priority over Busy and No Answer
conditions.
In addition to the three usual methods of forwarding described above, a fourth
option called Follow Me is available. This option allows a station user to set a
Forward All condition from his/her station to another station while at the remote
station. To display the Follow Me condition, the TRSF key lights steady red at the
station that is forwarded. The TRSF key also lights if Forward All is set and no key
is programmed for Forward All.
Keyset users can be given an external call forward button to forward their calls to
an external phone number. Each outside line may be programmed to either follow
4.2.2
CONTENTS
Advertisement
Table of Contents
