Changing The Hepa-Filter - Parish Supply TRIUMPH 12S - 86064 Instructions For Use Manual

5.5

Changing the HEPA-filter

16
• Never operate the cleaner without the HEPA-Filter in place in the
machine. These machines are not designed for picking up
hazardous - i.e. poisonous dust!
1. Disconnect the power cord
from the electrical outlet.
Push the Filter Cover Latch
(13) downwards so that the
cover is released. Remove
the filter cover from cleaner.
2. Grasp at the filter frame and
remove the used and dirty
HEPA-filter.
3. Grasp at the filter frame and
then insert the new HEPA fil-
ter to the cleaner by pushing
it in place. (Never touch the
filter media of a HEPA-filter!
Doing so may cause a loss
of performance of the HEPA-
filter).
4. Snap the Filter Cover back in
place at the cleaner.
CAUTION