Cleaning Or Changing; The Pre-Filter - Parish Supply TRIUMPH 12S - 86064 Instructions For Use Manual

5.6

Cleaning or changing

the pre-filter

The pre filter catches any dirt spilled from the bag, before it can enter
the vacuum motor. The filter is located below the bag.
Clean or replace motor pre filter every 5th time that the bag is changed.
(more often in very dusty applications).
1. Disconnect the power cord
from the electrical outlet.
Then push the Dust lid button
(11) in and remove the dust
lid (4).
2. Grasp at the filter holder and
pull the holder out from the
Dust compartment.
3. Remove the dirty filter from
the filter holder and replace
with a new pre filter. The pre
filter may also be washed.
Wash it in warm water. Let
the filter dry completely be-
fore putting it back into the
filter holder.
4. This machine is also
equipped with a deodorizer
pad. It´s located in the pre
filter holder.
Replace it to a new deodor-
izer pad when the function
begins to fade.
5. Put back the new/washed
filter into the holder. Then put
back the holder with filter in
place in the bag housing.
6. Fit the two notches of the
back cover to the two slots
at the lower part of the bag
housing, and push the back
cover back in place at the
housing.
17