Rackmounting The Server - Asus 1U Rackmount Chassis Kit R10-A2P4 User Manual

3.4

Rackmounting the server

To mount the server to the rack:
1. Firmly hold the server on both sides and insert the rear panel side to
the front end of the rack rail, then carefully push the server all the way
to the back until the front panel fits the front end of the rack, and the
rack screws on the server match the middle hole on the rack..
2. Tighten the two rack screws to secure
the server to the rack.
3-4
Rack screw
Chapter 3: Rackmounting