Table of Contents
Advertisement
2.7
SATA backplane cabling
Connects the SMBus
cable from the MB
Ensure that the FAN1 connector on the SATA backplane and the
CPU_FAN2 on the motherboard are connected via the 3-pin fan cable.
The fan RPM (rotations per minute) are monitored and automatically
adjusted through this feature.
2-18
Connect the SATA
cables from the MB
Connect the SATA HDDs
(FAN1) Connects the fan cable
from CPU_FAN1 on the MB
Connect the system
fan cables
Connects a 4-pin plug
from power supply
Chapter 2: Hardware setup
Advertisement
Table of Contents
