Removing And Installing The Chassis Cover; Removing The Cover - Asus 1U Rackmount Chassis Kit R10-A2P4 User Manual

2.2

Removing and installing the chassis cover

2.2.1 Removing the cover

1. Use a Phillips screwdriver to remove the screw on each front end of
the top cover.
2. Loosen the two thumbscrews on
the rear panel to release the top
cover from the chassis.
3. Firmly hold the cover and slide it
toward the rear panel for about
half an inch until it is disengaged
from the chassis.
4. Lift the cover from the chassis.
ASUS R10-A2P4 1U rackmount chassis kit
Thumbscrews
1/2 inch distance
2-3