Belkin F1PI241EGau Self Help Manual page 3

tsg-anz-vhd-9 -WinVista Encryption
Page 3 of 9
Self Help Guide
5) In the space provided in Passphrase, create a password – this can be any
combination of letters and numbers
6) Click Save Settings
7) Write down the characters in Key 1 – this is now your 'Network Key' or
'Encryption Key'
NB. There are ten (10) characters in total.
This is the 'key' that will be required to be entered on your wireless PC.
When you setup your wireless, it will ask you to type in a 'Network Key' or
'Encryption Key'.
128 Bit WEP:-
1) Under Wireless click Security
2) Click WEP
3) Click 128 Bit for WEP Mode leave all other settings as default
4) Place a tick in the Passphrase field
5) In the space provided in Passphrase, create a password – this can be any
combination of letters and numbers
6) Click Save Settings
7) Write down the characters in Key 1 – this is now your 'Network Key' or
'Encryption Key'
NB. There are twenty six (26) characters in total.
This is the 'key' that will be required to be entered on your wireless PC. When
you setup your wireless, it will ask you to type in a 'Network Key' or 'Encryption
Key'.
If you still require further assistance
contact Belkin Technical Support
Call: 1300 55 47 80
Visit: www.belkin.com/support