SELECTING A MENU AND STARTING THE MASSAGE
*Display language on the control panel may differ depending on the region the unit was purchased.
The illumination will light up and sound
will start when you sit down.
•
To stop the sound, press the
the display.
•
To stop the illumination, press the
•
Color of the illumination will change according to the operation.
•
If the illumination does not light up and sound does not start
after sitting down, sit back deeply in the chair.
•
After 15 minutes of use, we recommend that you take a 10 minute break.
•
Use the unit up to twice per day, for a total of 30 minutes.
See Warning No. 4 and 8 on page E4.
1
Press the
•
The power will turn off automatically if the massage does not start within 3 minutes after turning on the power.
1
2
2
Select the auto program you want.
•
Please press one of the flashing buttons.
•
If you press another auto program selection button or a manual operation button during your selected auto program
massage, the massage will switch to the newly selected massage.
•
In auto programs, the leg/foot massage begins at the same time.
It is possible to stop or change the intensity of the leg/foot massage during the program. (See page E20.)
•
Pressing an auto program selection button automatically moves the backrest and legrest into massage position.
3
Sit as far back in the seat as possible with your head on the pillow.
E18
button 1.
button 2.
button to turn on the power.
is lit on
*EP-MA10 is illustrated.
*EP-MA10 is illustrated.