5. Raising the backrest to the upright position
1
Insert the power plug into the power outlet.
2
Confirm the lock switch key is set to the
"open" position.
3
Confirm the power switch is set to the "on"
position.
4
Press the
button on the control panel
twice.
•
Press once, and then press again approx. 1 second later.
The backrest will rise to the upright position automatically.
6. Placing the control panel into the control panel stand
1
Fit the groove on the side of the
control panel to the projection on the
inside of the holder.
•
Put the control panel cord on the outer side of the armrest
before use.
Lift the control panel to remove.
1
Projection on the inside of
the holder
E15