Fishman OEM TRIPLEPLAY User Manual page 9

Pairing the Controller and Receiver (cont'd)
3. Press the pairing button on your receiver and controller
need to press the two buttons simultaneously. Note that the button on the receiver is also the LED.
power switch
4. Now the receiver LED glows continuously, indicating that it's linked to your controller. The controller LED
blinks once every fi ve seconds, indicating that it's transmitting to your receiver.
5. To temporarily break the connection, press either of the LED buttons. Both LEDs will resume blinking at
their former faster rate. Press either LED button to reconnect.
If you have started your TriplePlay software before your items are linked, the software may need to be closed
and reopened after the linking process is complete.
Audio Hardware Settings
Confi gure TriplePlay to work with whatever method you're using to get sound
in and out of your computer. (The most common confi guration options are
covered in Typical TriplePlay Setups.)
To reveal these settings, click Options near the upper-left corner of the main
window, and then Preferences. The Preferences window appears (
If you don't intend to use traditional guitar, select your preferred built-in
audio drivers for input and output.
If you're simply plugging in to the computer's built-in audio input using an
adapter plug, choose Built-In Output and Built-In Input. If you've download-
ed a third party ASIO driver, you may also use that as your option for audio
output.
If you're using a dedicated audio interface, make sure it's connected. Its
name should appear as an option in the output and input fi elds. If the
device has more than two channels of input and/or output, you can select
which channels to use.
pairing button
USB charing
port
Triple Play M/N: OEM-TRP-M01
FCC ID: RMU-OEMTRPM01
IC: 10812A-OEMTRPM01
Assembled in China
Guitar back plate
. The order doesn't matter, and you don't
(fi gure 2)
).
fi gure 3
9
pairing button
fi gure 2
fi gure 3