On-Screen Service Menu - Sanyo DP32640 Service Manual

Table 1. ON-SCREEN SERVICE MENU
When IC5750 (Flash Memory) is replaced, check the bus data to confirm they are the same as below. See page 3 for
On-Screen Service Menu access and adjustments.
Index ParameterName
2 OP1
3 OP2
NOTES: Option 2 Data (Display Panel)
Option 1 and Option 2 data is initial and can be set according to adjusment information.
PROGRAM CODES
The microprocessor used in this model is a multi-purpose type and is used in several different models. To ensure
proper operation and the correct features for your particular model, the program codes must be correct.
Note 1. Option Data 1 (No. 2 OP1) should be hexadecimal 00.
See 2 above. If this program code is wrong the TV will not operate properly.
Note 2. Option Data 2 (No. 3 OP2) should be hexadecimal 0A.
See 3 above. If this program code is wrong the TV will not operate properly.

ON-SCREEN SERVICE MENU

Value Def
0x0 0
0x3 1
Min Max
0 255
1 32
– 4 –