To Configure The Tour Settings; To Set The Tracing Function - Samsung SNP-6321 User Manual

setup screen

To configure the tour settings

The tour function enables you to call groups of your presets in sequence.
1. Select <tour>.
The menu screen will switch to the tour
setting screen.
2. Configure the tour settings in detail.
• Group No. : Select a group number.
• Dwell time : Specify a waiting time
before a new group is called.
3. Press the [
Saved in the bottom list.
4. Press the [
It performs the tour operation.
5. Press the [
The running tour will be stop.
6. Press the [
Selected tour data will be deleted.

To set the tracing function

Tracking remembers the trace of movements instructed using the direction button and
reproduces it for your reference.
1. Select <trace & auto run>.
This will bring up the tracing and auto
operation setting menu screen.
2. Select a tracking number.
The operation will be saved with display
of the memory usage. The saving time differs, depending on the level of the PTZ
operation.
If memory is filled to 100% or the recording end configuration is not completed in
2 minutes from the beginning of saving, it will be automatically terminated.
84_ setup screen
] button.
] button.
] button.
] button.