Selecting The Playback Starting Point - Canon LEGRIA HFR16 Instruction Manual

NOTES
• When the audio level meter reaches the red point (0 dB mark), the
sound may be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the

Selecting the Playback Starting Point

If you have a very long scene, you may
want to start playing back the scene
from a certain point. You can use the
movie timeline to break the scene to
segments at fixed time intervals rang-
ing from 6 seconds to 6 minutes. If you recorded movies with the Face
Detection function (
into segments every time the camcorder registered a change in the
main subject of the scene.
Operating modes:
Movie Timeline
1 Open the original movies or playlist index screen.
• /
memory or on the memory card.
• To open the playlist index screen from the original movies index
screen:
- /
INDEX SEL.
then select [Playlist].
- Press
2 Select ( ,
• The [Timeline] screen appears. The large thumbnail will show the first
frame of the scene. Below it, the timeline ruler shows frames taken
from the scene at fixed intervals.
DISP.
• Press
60) activated, you can display the scene divided
/ You can select the original movies in the built-in
/ For scenes in the built-in memory, press
. For scenes on the memory card, press
PLAYLIST
.
) the scene you want to view and press
again to return to the index screen.
[Microphone Attenuator] setting.
INDEX SEL.
and
DISP.
.
67
Video