Canon LEGRIA HFR16 Instruction Manual page 121

IMPORTANT
• While the camcorder is connected to the computer, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off the camcorder or the
computer.
Uploading your Videos Wirelessly
If you are using an Eye-Fi card, you can automatically upload the mov-
ies from the [For Web (MPEG-2)] index screen to your favorite video
sharing Web site. You will need to have installed the software supplied
with your Eye-Fi card and completed all the required configuration
setup in advance. Refer to the instruction manual of the Eye-Fi card.
Please read the IMPORTANT section (
card.
1 Insert your Eye-Fi card in the camcorder and make sure there is
sufficient available space on the card.
2 Convert the desired movie (
• When the conversion is completed, select [End Without Connecting]
and press
• If you are within the range of a configured network, Web upload will
start automatically after the conversion is completed.
• The status of the wireless communication is shown by the Eye-Fi
icon as follows:
- (grayed out) Communication not established
- (white, flashing) Connecting;
Wireless upload on standby
- (animated) Wireless upload in progress
- [Eye-Fi Communication] is set to [
- Wireless upload stopped by the camcorder (
- Error reading from the Eye-Fi card (
.
122) before using an Eye-Fi
118).
(white, continuously on)
Off]
143)
External Connections
145)
121