Kipor KDD03 Operation Instructions Manual page 13

2 Components and safety labels
Warning
According to Rule for Labor Health, the
loader and auxiliary components cannot be
used for unintended purpose.
Read Instructions in advance and operate
the loader safely.
■If the loader is used to lift goods as lifter, goods
may fall down or loader may turn over. Forbid
such dangerous usage.
Warning
Please pay attention to followings during operation.
1. Sudden turning or rotation will cause turnover if
bucket is lifted.
during driving.
2. Turnover may occur when loader runs across a
slope or changes the direction during running.
Change of direction shall be done on the flat ground
as much as possible.
3. Do not operate the loader near pool, reservoir, cave
and other place exposed to risk of fall.
Warning
·
When loader is used to load or unload goods in a
truck, please observe following practices for safety
concern.
1. Load or unload goods at a high level.
2. If access board is used, do not change the direction
when loader is on the access board.
3. The correct way of stop brake is to fit tyres with stop
blocks and fix the loading space of truck and loader
tightly with wires.
·
Lock the operating lever and use the support of lifting
arm for maintenance and check on lifting bucket in
order to avoid the descent of bucket.
Scald
Position the bucket as required
Not open
Use special ISO VG32 brake
oil but not common vegetable
oil.
1. Read Instructions and understand the
correct method of operation in advance.
2. Sound the horn to check if there is any
person around the loader when engine
starts.
3. Sit on the driver's seat and operate the
loader.
4. Lower the bucket to the ground, trigger
the Stop Brake, stop the running engine
and take away the start key before leave.
5. Do not activate the Stop Brake when
loader is running. Sudden brake poses a
great danger.
6. It will be difficult to handle the steering
wheel easily if engine stops when loader is
running. Therefore do not stop the engine
without reason.
·Use the lock connection to fix front and rear
carriages during maintenance, transportation and
lift.
·Remove the lock connection and hide it as original
when loader is on the way and in service. Loader
cannot turn if carriage is fixed, possibly leading to
injury incidents.
Scald
8
Attention
Attention
Warning
Not touch