Communications Connections - Meridian 598 User Manual

Use this output
AUX DIGITAL OUT
SMART LINK
DIGITAL OUT
Analogue version
Use this output
ANALOGUE OUT
AUX DIGITAL OUT
The digital connections should be made with high quality 75
screened cable. Suitable cables are available from Meridian. We
do not recommend using audio cables which do not have
56
To connect to this
A surround processor such as the
Meridian 561 Digital Surround
Processor, a digital preamplifier such as
the Meridian 562V, or Meridian DSP
loudspeakers.
A surround processor such as the 568.2
Digital Surround Processor with a MHR
Smart Link input.
To connect to this
A multi-channel analogue output from a
DVD Audio player or projector.
A surround processor such as the
Meridian 561 Digital Surround
Processor, a digital preamplifier such as
the Meridian 562V, or Meridian DSP
loudspeakers.
adequate shielding or the correct impedance, or cables intended
for UHF applications, as these do not provide adequate
shielding in the 1–30MHz region.
The MHR Smart Link connection can be made with an SVGA
computer monitor lead, available from PC dealers. A Smart Link
cable is supplied with the 568.2. The analogue connections
should be made with high-quality phono leads.

Communications connections

The following table gives details of the communications
connections:
Use this connection
COMMS
RS232 connection
To connect to this
Other Meridian 500 series
equipment, or Meridian DSP
loudspeakers.
For future expansion, to allow the
598 to be interfaced to a
computer. Contact your dealer for
more information.