Replacing The Display Panel - Dell Inspiron M5040 Owner's Manual

Replacing the Display Panel

1. Follow the instructions in Before You
2. Attach the display cable to the back of the display panel.
3. Connect the display cable to the display-board connector and secure it with the tape.
4. Align the screw holes on the display bracket with the screw holes on the display panel and replace the four screws (two on each side).
5. Route the display cable and Mini-Card antenna cables through the routing guides on the display hinges.
6. Align the screw holes on the display panel with the screw holes on the display cover and replace the six screws.
7. Replace the display bezel. See
8. Replace the display assembly. See
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Display Bezel.
Replacing the Display Assembly.