Hisense 32K220W Quick Setup Manual page 15

Network
Configuration
English 13
Turning the TV on for the First Time
Pic 1
Wired Network
Configuration
MAC Address
Wired PPPOE
Enter
OK
On the Network Configuration, you can press the [◄/►] buttons
to select DHCP (Auto) or Static (Manual). See the Pic 2
· DHCP: Automatically acquire the necessary connection values
and connect your TV to a network if you are connecting the TV
to a network that supports DHCP.
· Static: Manually Input the connection values such as IP,
Netmask, Gateway and DNS by using the [◄/►] buttons or
Numeric buttons to connect TV to the network. (To get the
Static IP address, please check the settings of the router/
modem or your PC or contact the network provider.)
Set Network Type to Wi-Fi Network .
Before setting, Refer to Making Connections >LAN >Wireless
setup.
On the Network Configuration screen, press the [▲/▼] buttons
to select Wi-Fi Network, then press the [OK] button to enter the
submenu.
On the Wi-Fi Network screen, press
the [◄/►] buttons to select On or Off.
See the Pic on the right.
If you select On, you can set up your
TV's Wi-Fi Network connection. Select
Base Station to enter the submenu.
If you have a wireless network around, all the existing wireless
network will appear on the screen. When connecting to certain
network, press the [▲/▼] buttons to select the wireless network
you want to connect and press the [OK] button to confirm. Select
the Password from screen and press OK then screen of Please
Enter Password will pop up. After entering the password, press
the [BLUE] button to connect. If there is no password, you can
press the [BLUE] button to connect directly.
If the wireless network connect successful, the screen will appear
the prompt "Success".
Proxy
Return
MENU
Pic 2
Network Configuration
IP 0.0.0.0
Netmask 255.255.0.0
Gateway 0.0.0.0
DNS 0.0.0.0
OK
Enter
OK
Wi-Fi Network
Base Station
MAC Address
Wi-Fi PPPOE
Proxy
Enter
OK
Static
Return
MENU
On
Return
MENU