Setup Menu List - Yamaha SRT-1500 Owner's Manual

Setup menu list

Menu
Channel Level
Sound
Dynamic Range
Audio Delay
HDMI Control
HDMI Audio Out
HDMI
Audio Assign
Dimmer
Function OSD Language
Auto Power Standby
Audio
Information Video
System
Information
Network Connection
IP Address
Network MAC Address Filter
Network Standby
Network Name
Network Update
Bluetooth
Transmission
Bluetooth
Device Search
MAC Address
Item
Front L, Front R, Center, Surround L, Surround R,
Subwoofer
DHCP, IP Address, Subnet Mask, Default
Gateway, DNS Server (P), DNS Server (S)
Filter, MAC Address 1-10
Perform Update
Function
Adjust the volume of each channel.
Specify dynamic range.
Adjust the delay between video and audio output.
Turn HDMI control on or off.
Choose whether HDMI audio input is played via this unit or the TV.
Specify the audio input from the TV jack or HDMI IN jack when HDMI is selected as
the input source.
Adjust the brightness of indicators on the front panel.
Change the language used for menus displayed on the TV screen.
Turn Auto Power Standby on or off.
Display audio input signal information.
Display video input signal information.
Display this unit's firmware version.
Display the unit's network information.
Select the network connection method.
Configure the network parameters (such as IP address).
Set the MAC address filter to limit access to the unit from other network devices.
Enable/disable the function that turns on the unit from other network devices.
Edit the network name (the unit's name on the network) displayed on other network
devices.
Update the firmware via the network.
Enable/disable the Bluetooth functions.
Turn the function that transmits audio to a Bluetooth device, such as Bluetooth
speakers, on or off.
Search for the Bluetooth device, such as Bluetooth speakers, to which audio will be
transmitted.
Display the MAC address for the Bluetooth connection.
Page
49
49
49
50
50
50
51
51
51
52
52
52
53
53
54
54
55
55
55
56
56
56
56
SETTINGS ➤ Setup menu
En
48