Yamaha SRT-1500 Owner's Manual page 27

Playing back audio from a Bluetooth device
on the unit
1
Press the BLUETOOTH key on the remote control
when the unit is turned on.
Bluetooth is selected as the input.
BLUETOOTH
• If you are unable to select Bluetooth as an input source, be sure that the
following settings have been applied.
– "Bluetooth" in the setup menu is set to "On" (p. 56)
– "Transmission" in the setup menu is set to "Off" (p. 56)
2
Turn on the Bluetooth device.
Flashes
Connecting
3
Select "SRT-1500" in the Bluetooth device list on the
device.
4
Play back a song on the Bluetooth device.
BLUETOOTH
Glows
Glows steadily
Connection established
PLAYBACK ➤ Wireless playback of audio via Bluetooth connection
• Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each
other.
• Adjust the volume level of the Bluetooth device as required.
• If a Bluetooth device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed with step 1. Terminate
this connection to connect to a different Bluetooth device.
• Setting "Network Standby" in the setup menu to "On" allows the unit to be turned
on and off with Bluetooth device operations.
Terminating Bluetooth connection
Bluetooth connection is terminated in the following cases.
The indicator on the unit's front panel turns off when the
connection is terminated.
• The Bluetooth device is turned off.
• The BLUETOOTH key is pressed for more than 3 seconds.
• The unit is turned off.
27
En