Panasonic WH-MDC09C3E8 Service Manual page 45

11.4.1 Wire Stripping And Connecting Requirement
11.4.2 Connecting Requirement
The equipment's power supply 1 complies with IEC/EN 61000-3-2.
The equipment's power supply 2 complies with IEC/EN 61000-3-2.
For power supply 3: (Only applicable for model 12kW, 14kW and 16kW)
The equipment's power supply 3 complies with IEC/EN 61000-3-2.
The equipment's power supply 3 shall be connected to a suitable supply network, with the following
maximum permissible system impedance Z
Please liaise with supply authority to ensure that the power supply 3 is connected only to a supply of that
impedance or less.
11.4.3 Wired Remote Control Installation
Attached Accessories
No. Name
(1) Remote control
(2) Remote control cable
Screw
(3)
(M4 machine pitched – 30mm)
Screw
(4)
(M4 self tapping – 14mm)
= 0.449 Ω at the interface of the point.
max
Qty. Diagram
1
1
3
3
45
Remark
Length (15 m)
Installing the remote control to an outlet box
(embedded cable)
Installing the remote control to the wall
(exposed cable)