Breville Scraper Pro BEM800XL/B Instruction Book page 11

ADDItIonAL fEAtURES
PAUSE MoDE
At any stage during mixing, whether you
are using the count-up or count-down timer,
you can rotate the Speed Control Dial to the
Pause position. This will turn the Mixer off
and pause the timer. This enables you to
assess the mixing progress or add additional
ingredients without affecting the timer.
For example, if you are mixing using the
count-up timer, you can rotate the Speed
Control Dial from one of the mixing speeds
to the Pause position. The Mixer will turn
off and pause the timer so you can add
ingredients. Once ready, rotate the Speed
Control Dial back to one of the mixing
speeds and the timer will continue to
count-up from the exact time it was paused.
Alternatively, you can reset the timer to
0:00 by turning the Speed Control Dial to
the OFF position.
MotoR hEAD SAfEty CUt-off
The mixer is equipped with a motor head
safety cut-off. If the motor head is lifted at
any time while the mixer motor is turned on,
the safety cut-off will automatically turn the
mixer off and switch the mixer into standby
mode.
To restart the motor, lower the motor head
into the secured position, turn the Speed
Control Dial to any setting then back to
previous selected setting to resume mixing.
This safety feature will allow the mixer to
remain inactive and the head raised for a
5 minute period. If head is raised for more
than 5 minutes, the count up/down timer
will reset to zero. If the motor head is raised
for less than 5 minutes the timer will resume
its count up/down cycle. If the mixer head is
lifted for more than 5 minutes the mixer will
turn off and reset the time to zero. To restart
the motor, turn the dial to OFF first, then to
the required setting. The timer will restart.
To turn the mixer off, turn the dial to the
OFF position and unplug the appliance.
20
ELECtRonIC CUt-off
(CURREnt ovERLoAD)
The Mixer is equipped with an
electronic protection cut-off which
will activate if the motor is stalled or
overloaded. This is normally a result of
excessive ingredients being processed
at one time. Should the Mixer go into
this mode, the LCD screen will display
E1, the LED Speed Indicator will flash
and an alert will sound 3 times.
If this error occurs, turn the Speed
Control Dial to the OFF position and
remove the power plug from the wall
outlet.
Remove some of the ingredients from
the mixing bowl before restarting the
Mixer.
ADDItIonAL fEAtURES
thERMo CUt-off
(tEMPERAtURE ovERLoAD)
The Mixer is equipped with a
self-resetting safety device which
safeguards against overheating of
the motor with excessive loads. If
overheating occurs, the Mixer will
automatically activate the overheating
protection device and the motor will
switch itself off. Should the Mixer go
into this mode, the LCD screen will
display E2, the LED Speed Indicator
will flash and an alert will sound 3
times.
If this error occurs, turn the Speed
Control Dial to the OFF position and
remove the power plug from the wall
outlet. Wait at least 15 minutes before
restarting the Mixer.
21