Hisense 65K720UWG User Manual page 18

Application
Only for the part of the default built-in application models, this menu you can adjust
the settings applied.
Settings
Configure how to control CEC-enabled devices with your TV remote.
• CEC&MHL control: Allow HDMI devices to control each other.
• Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is
turned off .
• TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.
• Device Connect: Allow CEC-enabled devices to communicate with each other
when connected through an HDMI cable.
HDMI
• CEC Device Lists: View a list of all CEC-enabled devices.
Function
NOTES
HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
The HDMI CEC feature of the connected device must be turned on.
If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC
control features do not work.
Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
Access the Advanced Settings menu.
• Menu Timeout : Set the amount of time that you'd like for the menu to display : 10s ,
20s , 30s , 60s or Off.
• User Mode: Set the TV to use in Home or Store Mode.
• PVR&T.Shift: Set the disk partition and storage space size where you want to store
your PRV/T.shift contents. (Since the function record temporary the program onto a
hard disk only.)
Advanced
PVR time setting: Set PVR recording time in advance or in delay.
Settings
• Input Labels: Edit the input labels.
• Default LiveTV Source: Select the default input on the remote control Live TV.
• Setup Wizard: Use the Setup Wizard for instructions to help you set up your TV.
• Power Indicator: Set the Power Indicator light to stay On or Off in standby mode.
· Start in advance: Set PVR recording time in advance.
· Delay ending: Set PVR recording time in delay.
Menu
16