Table of Contents
Advertisement
SNMP Contact Information: Assign contact information, such as an operator
name and phone number for the inverter, which can be read via SNMP
queries. (This information is optional)
Click on the Save Settings button at the bottom of the page to save any changes
and re-boot the unit.
E-mail Setup
Configure these settings to enable automatic e-mail notifications directly
from the inverter. The information required for this is available from your
Network Administrator, or Internet Service Provider. (ISP)
E-mail:
SMTP Server: Enter the name or the IP address of your SMTP server used for
sending outgoing e-mail. (e.g. "smtp.gmail.com")
SMTP Port: Enter the port used by your SMTP server. (Normally 25)
SMTP Server requires SSL: Check this box if your SMTP server requires an
encrypted SSL connection.
Sender E-mail Address: Enter an e-mail address that will appear as the
sender for all e-mail notifications sent from the inverter.
Figure 10: E-mail Setup Page
Innovative Circuit Technology Ltd.
17
Advertisement
Table of Contents
