Button Description; Connecting To Power; Standby Mode; Led Display - Laser SPK-WFQ10 Quick User Manual

BUTTON DESCRIPTION

-
Decrease
volume

CONNECTING TO POWER

Connect your Wi-Fi speaker to a mains power outlet using the supplied external power supply. This
speaker has no ON OFF switch so it will turn on automatically. Note: Disconnect the power, to turn the
speaker OFF.

STANDBY MODE

The system will enter Standby mode after 15 minutes without any audio signal input.
To exit out of Standby mode, begin playing music from your Phone App or, press the volume UP or DOWN
buttons.

LED DISPLAY

Status
STANDBY Fade in and Out
VOL- / + Flashes
LINE-IN Lights up
Flashes White
WI-FI
Lights up White
SET Flashes
MUTE Flashes Slowly
QUICK USER MANUAL
TOP
+
Increase
Mute
volume
Display
RED Standby mode after 15 minutes without any audio signal inputs.
Volume increase/ decrease
Orange Connected via LINE IN (Auxiliary input)
Booting process / Establishing Wi-Fi connection (via WPS mode)
System ready for Wi-Fi connection (AP Mode)
Green Reset to Factory default / Firmware updated
Mute audio
DC IN : Socket for
SET ( RESET/ WPS
mains power
Mode): Press
adapter. Connect
briefly to activate
the power
WPS mode; press
adapter to power
and hold for about
on the system
5 seconds to
automatically. restore the speaker
to factory settings.
Status
2
SPK-WFQ10
BACK
LINE-IN: Audio
input, 3.5mm
socket.
PLEASE USE
THE CABLE
SUPPLIED FOR
BEST SOUND