Important safety instructions and precautions .................. 2 Whats in the box ..........................3 Charging the SPK-BT202 ........................3 Switch ON/OFF the SPK-BT202 ......................4 Connect to PC or media player without bluetooth ................4 Pairing the SPK-BT202 with........................ 4 Mobile Phone (HSP – Head Set Profile) ..................5 iPad or iPhone ..........................
AUX in (Auxiliary device input via 3.45mm audio jack) LED charging indicator WHATS IN THE BOX SPK-BT202, mini USB charging cable, AUX 3.5mm audio cable, user manual CHARGING THE SPK-BT202 It is recommended to thoroughly charge electronic devices overnight before using it for the...
An audio confirmation will then be heard CONNECT TO PC OR MEDIA PLAYER WITHOUT BLUETOOTH Connect the AUX cable to the audio input on your SPK-BT202 and the other end to you PC or media player device. PAIRING THE SPK-BT202 WITH Note 1: Follow the below three common steps, before moving onto the specific section relating to your device.
Open the Bluetooth function of your mobile phone and start the “search” for Bluetooth devices service. Once the SPK-BT202 is located, it will appear on your device list. Then, select the device. Depending on your settings, a password may be required to pair with the SPK-BT202.
HFP device exception When the SPK-BT202 is in standby mode, it will not be able to connect to any HFP device. To “wake” the speaker and re-connect to the previously used HSP device, press the POWER BUTTON twice to re-connect automatically.
USER MANUAL SPK-BT202 Note 1: During audio playback, the SPK-BT202 will alert you of any incoming phone calls Note 2: Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone.
I have paired SPK-BT202 with another Bluetooth device (eg. an SPK-BT202 cannot “pair” to two devices at the same iPhone) before. I am now trying to time. You must first turn off / un-pair /select “forget pair with another device (eg.
Page 9
Step 3: Laser . will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery. Step 4: Wait for us to contact you.