Battery Removal - Remington wpg4035 User Manual

• Wear through: you may notice that the cutters have worn through the foils.
C CARE FOR YOUR TRIMMER
• Care for your appliance to ensure a long lasting performance.
• We recommend you clean your appliance after each use.
• The easiest and the most hygienic way to clean the appliance is by rinsing
the appliance head after use with warm water.
• Keep the switch in the "off" position when not in use.
, AFTER EACH USE
• To clean the precision and arc detail trimmers attachments:
• Brush the accumulated hair from the cutting assembly.
, TO CLEAN THE MINISCREEN FOIL
• Hold the trimmer in one hand, with the other press the foil release buttons
and gently pull the foil assembly off the trimmer.
• Blow any loose debris from the foil.
• Brush or rinse the accumulated hair from the cutter assembly.
• To replace the foil assembly, hold either side of the foil and push down until
you hear a click and it is firmly attached. Do not press down on the foil.
• Rinsing the groomer under water or using when in the shower may require
lubricating the cutter blades periodically.
, CAUTION
• Only use the light-grade oil or sewing machine oil on the blades.
• Do not use harsh or corrosive cleaners on the units or their cutters.
• Do not apply pressure or hard objects to cutters.
• Do not disassemble cutter assembly.
• Do not submerge in water as damage will occur.

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• To remove the rechargeable battery:
• Unplug the trimmer.
• Run the trimmer until the motor stops.
• Open the handle by placing a flat head screwdriver between the handle and
hang hook.
• Gently pry apart the hang hook from the handle.
7