Make A Cell Call; Predial A Cell Call; Answer A Cell Call; End A Cell Call - VTech DS6611 User Manual

Make a cell call

/CELL on the handset. The
1. Press
handset displays Select a device.
• If you have only one cell phone
connected to the telephone base,
press SELECT to select the only
device.
• If you have two cell phones
connected to the telephone base,
press or
phone and then press SELECT.
2. Enter the telephone number, and
then press /CELL to dial.
• The handset displays Unable to
call if your cell phone is in use.
NOTES
• The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
While entering numbers, press DELETE
•
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
• While using the cell line, place your cell
phone closer to the telephone base, and
make sure that there are no physical
obstacles such as large furniture or thick
walls between the telephone base and the
cell phone.

Predial a cell call

1. Enter the telephone number.
2. Press /CELL to dial.
• If you have only one cell phone
connected to the telephone base,
it is automatically selected to
make cell calls.
• If you have two cell phones
connected to the telephone base,
the handset displays Select a
device. Press
cell phone and then
press SELECT.
to select a cell
or to select a
NOTES
The handset displays Unable to call if
•
your cell phone is in use.
• The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
• While entering numbers, press DELETE
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).

Answer a cell call

/CELL,
Press
dialing key (0-9,
NOTE
You can also use your cell phone to answer
the call. If you answer with your cell phone, it
will disconnect from the telephone base.

End a cell call

Press OFF on the handset, place the
handset in the telephone base or
handset charger.
Answer a cell call while on a
home call
While you are on a home call and you
receive an incoming cell call, you hear
a beep, and your handset flashes
The telephone base and all other
handsets ring.
To answer the incoming cell call:
/CELL on the handset. The
Press
home line is put on hold.
To resume the home call on hold:
/HOME on the handset.
Press
18
/HOME, , or any
or ) to answer.
.