Hisense HR6TFF350 User's Operation Manual page 7

7
① Lower hinge part（right）
② Front foot fixed board
③ Adjustable bottom feet part
④ Self-tapping screws
9. Screw out lower hinge, change it to
the near hole site, and then screw up
and mount washer.
10. Just remount to the step 8,change
part①to left and part②to right and then
fix them with screws④ . Finally install
part③.
Lower hinge part (left)
11. Move the lower door and adjust its
position to align lower hole site and
upper hinge axis. Turn the middle
hinge by 180, change the washer on
the axis to the upper side, adjust the
middle hinge to the appropriate
position and then install it.
Note: washer may
stick to lower door.
12. Screw out The upper hinge axis,
washer
turn the upper hinge over and fix axis
on it. Then place it at side for use.
Note: washer may
stick to lower door.
13. Just remount to the step 2,change
upper hinge cover③to left and fix them
with screws② and then install the
screw cover①. Finally, change screw
hole cover④to right .
14. Open the upper door, mount door
racks and then close it.
Washer
Hisense Refrigerator
①
②
③
④
①Screw cover
②screw
③Upper hinge cover (left)
④Screw hole cover