Hisense HR6TFF350 User's Operation Manual page 6

3. Unscrew the flange screws ① which
are used for fixing the right upper hinge
part ②. Lift the upper door and place it
on a padded surface to prevent it from
scratching.
Note: Please hold the upper door by hand
during step 3 to prevent door dropping.
Remove the upper door and place it
4.
on a smooth surface with its panel
upwards. Loose screws② , detach
part① , then install part① to the left
side with screws②.
1
2
1
5. Loose screws used to fix the middle
hinge and remove middle hinge. Then
remove the lower door.
①Screw cover
②screw
③Upper hinge cover (right)
④
Screw hole cover
①flange screws
②right upper hinge part
① Door holder
② self-tapping screws
①
②
Hisense Refrigerator
6. Place the lower door on a smooth
surface with its panel upwards.Loose
screws②，detach part①. Then install
part① to corresponding position on left
side together with screws②.
① Stop block ② Self-tapping screws
7. Change screw hole covers on
middle cover plate from left to right (as
shown in figure below).
8. Place refrigerator flatwise, remove
and then loose screws④ .
part③
Remove part ② and part①.
6
①
②