Table of Contents
Advertisement
Flat Par QA5XS
The ADJ LED RC 2 infrared remote (sold seperately) has many dif-
fernet functions and gives you complete control of your Flat Par
QA5XS. To control the your desired fixture you must aim the control-
ler at the front of the fixture and be no more the 30 feet away. To use
the ADJ LED RC 2 you must first activate the fixtures infrared receiv-
er, to activate the receiver please see the instructions on page 10.
BLACKOUT - Pressing this button will blackout the fixture.
PROGRAM SELECTION - This button will let you access the units
4 built-in modes; static color mode, color fade mode, color change
mode, and both color fade & color change modes. Each press of the
button will switch to the next running mode.
• When the Red LEDs flash 2 times, this indicates that you are in
Static Color mode. Use the "+" & "-" buttons to scroll through the
static colors, or press two numbers to choose 1 of the 15 static col-
ors. Press FLASH button to activate strobing and use the "+" & "-"
buttons to adjust the flash rate.
Example: Press "0-3" to select static color 3 or press "1-2" to select
static color 12.
• When the Green LEDs flash 2 times, this indicates that you are in
Color Fade & Color Change mode. Press SPEED button and use the
"+" & "-" buttons to adjust the fade/change speed.
• When the Blue LEDs flash 2 times, this indicates that you are in
Color Fade mode. Press SPEED button and use the "+" & "-" buttons
to adjust the color fade speed.
• When the Amber LEDs flash 2 times, this indicates that you are in
Color Change mode. Press SPEED button and use the "+" & "-" but-
tons to adjust the color change speed.
FLASH - This button will activate the strobe effect. You can control
the flash rate by pressing the "+" and "-" buttons. Press this button
again to exit strobe mode.
SPEED - Press this button to activate and use the "+" & "-" buttons
to adjust the speed of color fade and color change mode, color fade
mode, color change mode, and the sound sensitivity level.
DMX MODE - This button will let you select which DMX mode you
ADJ Products, LLC - www.adj.com - Flat Par QA5XS User Manual Page 12
ADJ LED RC Operation
Flat Par QA5XS
want to use. Some fixtures will come with different DMX channel
modes. This button will switch between the different modes. Please
see pages 15-20 for DMX modes, values, and traits.
SL/SA (Slave/Sound Active) - This button lets you switch between
Slave mode in a Master-Slave configuration and Sound Active mode.
When the fixture is in Sound Active mode, use the "+" & "-" buttons to
scroll through the 16 sound active modes. To adjust the sound sensi-
tivity, press the SPEED button and use the "+" & "-" buttons to adjust
the senstivity.
SET ADDRESS - Press this button to set the DMX address. Press
this button first, then press the numbers to set the address.
Example: Set DMX Address 1 Press "S-0-0-1"
Set DMX Address 245 Press "S-2-4-5"
R G B A - Press either one of these buttons and the press the "+" or
"-" to adjust the brightness.
"+" and "-" - Use these buttons to adjust the flash rate speed, pro-
gram speed, sound sensitivity, and program selection.
DMX Control:
Operating through an DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX Mode and address.
1. Before connecting to an DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the "+" or "-" buttons to
scroll through the DMX Channel Modes. Set the mode before you
address the fixture. See the bottom of this page for the DMX
modes.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the "S" button. When the "S" button is pressed
the LED's will flash 2-3 times and all the red LED's will light. Use
the number buttons to press in your desired address. See "SET
ADDRESS" located above for examples.
Note: When setting the DMX address, each time a number is pressed
a LED color will glow, when you have set the DMX address correctly
all LED's will flash 2-3 times.
ADJ Products, LLC - www.adj.com - Flat Par QA5XS User Manual Page 13
ADJ LED RC Operation
Advertisement
Table of Contents
