Mitsubishi Colt Owner's Manual page 149

For pleasant driving
Never place anything on top of the sensor,
since doing so will prevent it from function-
ing properly.
Blower speed selection dial
Select the blower speed by turning the blower
speed selection dial clockwise or anticlockwise.
The blower speed will gradually increase as the di-
al is turned to the right.
5
When the blower speed selection dial is set to the
"0" position, all fan-driven airflow will stop.
5-08
Temperature control dial
The temperature control dial is used to adjust the
cabin temperature. Turn it clockwise to increase
the temperature and anticlockwise to reduce the tem-
perature.
E00702800329
NOTE
l
While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
Mode selection dial
E00703000490
To change the amount of air flowing from the ven-
tilators, turn the mode selection dial. (Refer to
"Changing the mode selection" on page 5-02.)
Air selection switch
To change the air selection, simply press the air se-
lection switch.
l Outside air {Indication lamp (A) is OFF}
Outside air is introduced into the passenger
compartment.
E00703200447
E00703400641