Starter Switch Positions; Keyless-Go - Mercedes-Benz 2011 SL550 Roadster Operator's Manual

or
X
Get a jump start ( Y

KEYLESS-GO

G
Observe Safety notes, see page 51.
Vehicles equipped with the KEYLESS-GO
feature are supplied with a SmartKey with
integrated KEYLESS-GO function.
The SmartKey must be present in the vehicle.
Pressing the KEYLESS-GO start/stop button
without depressing the brake pedal
corresponds to the various starter switch
positions ( Y page 78).
Pressing the KEYLESS-GO start/stop button
with the brake pedal firmly depressed will
start the engine ( Y page 98).
The function of the SmartKey overrules the
KEYLESS-GO function.
X
Make sure the automatic transmission is in
park position P.
X
Do not depress the brake pedal.
KEYLESS-GO start/stop button
USA only
:
Canada only
;
Position 0
Before you press the KEYLESS-GO start/stop
button, the vehicle's on-board electronics
have status 0 (as with SmartKey removed).
page 285).

Starter switch positions

Position 1
X
Press the KEYLESS-GO start/stop button
once.
This supplies power for some electrical
consumers, e.g. wipers.
When you now press the KEYLESS-GO
i
start/stop button
once more, the ignition (position 2) is
R
switched on
twice more the power supply is again
R
switched off
Ignition (or position 2)
X
Press the KEYLESS-GO start/stop button
twice.
This supplies power for all electrical
consumers.
When you switch on the ignition, all lamps
in the instrument cluster come on. The
high-beam headlamp indicator lamp and
turn signal indicator lamps will only come
on if activated. If a lamp in the instrument
cluster fails to come on when the ignition
is switched on, have it checked and
replaced if necessary. If a lamp in the
instrument cluster remains on after
starting the engine or comes on while
driving, refer to "Lamps in instrument
cluster" ( Y page 254).
i When you now press the KEYLESS-GO
start/stop button once, the power supply
is again switched off.
79
Z