Racetimer; Overspeed Range - Mercedes-Benz 2011 SL550 Roadster Operator's Manual

The engine oil temperature flashes if the
engine oil temperature has not yet reached
80†. During this time, avoid driving at full
engine speed.
If the engine reaches the overspeed range in
the manual shift program, the menu will be
shown in red. In addition, you will see UP next
to gear indicator ; as a reminder to upshift.
Use buttons & or * to select the
following functions in the AMG menu:
SETUP ( Y page 117)
R

RACETIMER (

Y page 117)
R
Overall analysis ( Y
R
Lap analysis ( Y page 118)
R
SETUP
X
Press button V or U repeatedly until
the AMG menu appears in the
multifunction display.
X
Press button & repeatedly until the
SETUP appears in the multifunction
display.
or
X
Tap the AMG button on the center console
(SL 63 AMG only) (
i
You can store and call up automatic
transmission program mode and
suspension style settings with the AMG
button on the center console (SL 63 AMG
only). For more information, see
Y
( page 144).
Automatic transmission program mode
:
indicator
Suspension style indicator
;
page 118)
Y
page 144).
RACETIMER
G
Warning!
The RACETIMER feature is only for use on
roads and in conditions where high speed
driving is permitted. Racing on public roads is
prohibited under all circumstances. The driver
is and must always remain responsible for
following posted speed limits.
The RACETIMER allows you to time and save
driving stretches.
X
Press button V or U repeatedly until
the AMG menu appears in the
multifunction display.
X
Press button & repeatedly until the
RACETIMER appears in the multifunction
display.
Lap number
:
RACETIMER
;
Gear indicator
=
You can start the RACETIMER when the
engine is running or the starter switch is in
position 2 ( Y page 78).
While the RACETIMER is being displayed, you
cannot adjust the audio volume using buttons
W or X.
X
Starting: Press button W.
X
Displaying intermediate time: Press
button X while the timer is running.
The intermediate time is shown for
5 seconds.
X
Stopping: Press button W.
When you stop the vehicle and turn the
SmartKey to position 1 (
vehicles with KEYLESS-GO, turn off the
engine and do not open the driver's door, the
Control system
Y page 78) or, in
Z
117