Multifunction Display - Mercedes-Benz 2011 SL550 Roadster Operator's Manual

Control system
114
= Press button
~ to end a call
to reject an incoming call
6 to answer a call
to dial
to redial
Press button
to select submenus in the
W
Settings menu
X
to set values
to operate the RACETIMER
to set the volume
? Press button
to select next or previous menu
V
U
Press button briefly
to move within a menu
&
*
Within Audio/DVD menu to
select previous or next track,
scene or stored station
Within Telephone menu to
switch to the phone book and
select a name or number
Press and hold button
Within Audio/DVD menu to
&
select previous or next track
*
with quick search or to select
previous or next station in
station list or wave band
Within Telephone menu to
start the quick search in the
phone book
Depending on the selected menu, pressing
the buttons on the multifunction steering
wheel will alter what appears in the

multifunction display.

Function only available in telephone menu.
10
11 AMG vehicles only.
10
10
11
The information available in the multifunction
display is arranged in menus and
accompanying functions and submenus.
The individual functions are then found within
the relevant menu (radio or CD operations
under Audio/DVD menu, for example).
These functions serve to call up relevant
information or to customize the settings for
your vehicle.
It is helpful to think of the menus, and the
functions within each menu, as being
arranged in a circular pattern.
X
Press button V or U repeatedly to
pass through each menu one after the
other.
X
Press button * or & repeatedly to
pass through each function display, one
after the other, in the current menu.
In the Settings menu, instead of functions,
you will find a number of submenus for calling
up and changing settings. For instructions on
using these submenus, see "Settings menu"
( Y page 121).
The number of menus available in the system
depends on which optional equipment is
installed in your vehicle.
Multifunction display
The multifunction display consists of the
display fields in the speedometer and the
tachometer. In its default state, the left
multifunction display shows the main
odometer and the outside temperature, while
the trip odometer appears in the right
multifunction display. This default setting is
referred to as the standard display.