Download Print this page

Before Getting Started - Zte Blade Vec Quick Start Manual

Hide thumbs Also See for Blade Vec:

Advertisement

Microphone
Back
Camera
Flash
micro-SIM (GSM)
Card Slot
micro-SIM
(WCDMA/GSM)
Card Slot
microSDHC
Card Slot
Speaker
Headset
Jack
Charging /
USB Jack
Power Key
Press and hold to turn on or off airplane mode,
enable silent mode, vibration mode or sound,
restart, or to power off.
Press to switch your phone to sleep mode or
wake it up.
Volume Key
Press and hold to turn the volume up or down.
On-screen Keys
(Home)
Touch to return to the home screen from any ap-
plication or screen.
Drag to Google to open Google Search.
(Back)
Touch to go to the previous screen.
(Recent Apps)
Touch to see recently used applications.

Before Getting Started

Installing the micro-SIM Card
Switch off your phone before installing the micro-SIM
card.
1.
Using the thimble take out the card holder.
2.
Put the micro-SIM card and the microSDHC card
to the card holder as shown and slip them into
the card holders.
CAUTION: To avoid damage to the phone, please
do not use other kinds of SIM cards, and do not use
a non-standard micro-SIM card cut from a SIM card.
You can get the standard micro-SIM card from your
service provider.
Charging the Battery
When you first get your new phone you'll need to
charge the battery like this:
1.
Connect the adapter to the charging jack.
2.
Connect the charger to a standard AC power
outlet.
3.
Disconnect the charger when the battery is fully
charged.
WARNING! Use only ZTE-approved chargers and
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
CAUTION: Do not change the built-in rechargeable
battery in your phone by yourself. The battery can
only be changed by ZTE or ZTE authorised service
provider.
NOTE: If the battery is extremely low, you may be
unable to power on the phone even when it is be-
ing charged. In this case, try again after charging
the phone for at least 10 minutes. Contact customer
service if you still cannot power on the phone after
prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
Press and hold the Power Key to turn on your
phone.
To turn it off, press and hold the Power Key to
open the options menu. Touch Power off > OK.
Waking Up Your Phone
1.
Press the Power Key to activate your screen
display.
2.
Long press the screen to unlock.
NOTE:
If you have set an 'unlock pattern', or a PIN/password
for your phone, you'll need to draw the pattern or en-
ter the PIN/password to unlock your screen.
Using the Touch Screen
Your phone's touch screen lets you control actions
through a variety of touch gestures.
Touch
When you want to type using the onscreen key-
board, select items onscreen such as application
and settings icons, or press onscreen buttons,
simply touch them with your finger.
Touch and Hold
To open the available options for an item (for ex-
ample, a message or link in a Web page), touch
and hold the item.
Swipe or Slide
To swipe or slide means to quickly drag your fin-
ger vertically or horizontally across the screen.
Drag
To drag, press and hold your finger with some
pressure before you start to move your finger.
While dragging, do not release your finger until
you have reached the target position.
Pinch
In some apps (such as Maps, Browser, and Gal-
lery), you can zoom in and out by placing two
fingers on the screen at once and pinching them
together (to zoom out) or spreading them apart (to
zoom in).
Rotate the screen
For most screens, you can automatically change
the screen orientation from portrait to landscape
by turning the phone sideways.

Advertisement

loading

This manual is also suitable for:

Blade vec pro