Table of Contents
Advertisement
Controls in detail
Automatic transmission
Limiting gear range
Warning!
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle's ABS will not
prevent this type of loss of control.
Briefly press the gear selector lever to
the left in the D- direction.
The transmission will shift to the next
lower gear as permitted by the shift
program. This action simultaneously
limits the gear range of the trans-
mission ( page 174).
i
To avoid overrevving the engine when down-
shifting, the transmission will not shift to a lower
gear if the engine's max. speed would be
exceeded.
176
Extending gear range
Briefly press the gear selector lever to
G
the right in the D+ direction.
The transmission will shift to the next
higher gear as permitted by the shift
program. This action simultaneously
extends the gear range of the
transmission.
i
If you press on the accelerator when the en-
gine has reached its rpm limit, the transmission
will upshift beyond any gear range limit selected.
Canceling gear range limit
Press and hold the gear selector lever
in the D+ direction until
the right multifunction display.
The transmission will shift from the cur-
rent gear range directly to gear
range D.
Shifting into optimal gear range
Press and hold the gear selector lever
in the D- direction.
The transmission will automatically se-
lect the gear range suited for optimal
acceleration and deceleration. This
may involve shifting down one or more
gears.
D
reappears in
Advertisement
Table of Contents
