Table of Contents
Advertisement
Low-beam headlamps
The low-beam headlamps can be switched
on and off with the exterior lamp switch
using the manual headlamp mode.
Turn the exterior lamp switch to
position B.
The following lamps switch on:
Low-beam headlamps
Tail and parking lamps
License plate lamps
Side marker lamps
Automatic headlamp mode
The following lamps switch on and off
automatically depending on the brightness
of the ambient light:
Low-beam headlamps
Tail and parking lamps
License plate lamps
Side marker lamps
Warning!
If the exterior lamp switch is set to U,
the headlamps will not be automatically
switched on under foggy conditions.
To minimize risk to you and to others,
activate headlamps by turning exterior lamp
switch to B when driving or when traffic
and/or ambient lighting conditions require
you to do so.
In low ambient lighting conditions, only
switch from position U to B with the
vehicle at a standstill in a safe location.
Switching from U to B will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions
may result in an accident.
The automatic headlamp feature is only an
aid to the driver. The driver is responsible for
the operation of the vehicle's lights at all
times.
Controls in detail
Turn the exterior lamp switch to
G
position U.
With the SmartKey in starter switch
position 1, the tail and parking lamps,
the license plate lamps, and the side
marker lamps will switch on and off
depending on the brightness of the
ambient light.
When the engine is running, the
low-beam headlamps, the tail and park-
ing lamps, the license plate lamps, and
the side marker lamps will switch on
and off depending on the brightness of
the ambient light.
i
Canada only:
High-beam headlamps are only available with the
exterior lamp switch in position B.
Lighting
107
Advertisement
Table of Contents
