Vehicle Status Messages In The Multifunction Display; Messages In The Multifunction - Mercedes-Benz 2009 R-Class Operator's Manual

i The storage well casing should now be
positioned according to the mounting
direction indicators ( Y page 302).
X
Secure the spare wheel by turning the
retaining screw ( Y page 304) clockwise.
X
Place the jack into the storage well casing
( Y page 302).

Vehicle status messages in the multifunction display

Vehicle status messages in the
multifunction display
Notes
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator's Manual.
Selecting the Vehicle status message
memory menu in the control system
( Y page 151) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot be
cleared from the multifunction display using
the reset button ( Y page 143) or button
or on the
j, k, · è
multifunction steering wheel.
Other messages of high priority and
messages of less immediate priority can be
cleared from the multifunction display using
the reset button ( Y page 143) or button
or on the
j, k, · è
Practical hints
multifunction steering wheel. They are then
stored in the Vehicle status message
memory menu ( Y page 151). Remember that
clearing a message will only make the
message disappear. Clearing a message will
not correct the condition that caused the
message to appear.
G Warning!
All categories of messages contain
important information which should be
taken note of and, where a malfunction is
indicated, addressed as soon as possible at
an authorized Mercedes-Benz Center.
Failure to repair the condition noted may
cause damage not covered by the
Mercedes-Benz Limited Warranty, or result
in property damage or personal injury.
G Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as speed or outside temperature,
warning/indicator lamps, malfunction/
warning messages or the failure of any
Z
305