Mercedes-Benz 2009 R-Class Operator's Manual page 220

Controls in detail
Loading and storing
Holder behind B-Pillar
1
Holder behind C-Pillar
2
With the cargo volume expanded in part
R
( Y page 210), use holders behind C-pillars
and the cargo tie-down rings in the third-
2
row footwell ( Y page 209).
With the cargo volume fully expanded
R
( Y page 211), use holders behind B-pillars
and the cargo tie-down rings in the
1
second-row footwell ( Y page 209).
X
Open the hook and loop fasteners on the
cargo net package.
X
Roll out the cargo net.
X
Unfold the cargo net.
X
Engage the lower cargo net bar.
The cargo net bar must engage audibly.
218
Installing the cargo net
Cargo net installed behind the C-pillar
Holder
1
Cargo net bar
2
Cargo net bar
3
X
Hang cargo net bar on holder
2
indicated by the arrow.
X
Push cargo net bar forward into holder
2
in direction of arrow.
1
X
Engage cargo net bar 3.
The cargo net bar must engage audibly.
Pulling the cargo net tight
Belt hook attached in the third-row footwell
Belt hook
1
Cargo tie-down ring
2
Tightening belt
3
X
as Hook belt hook
1
in direction of arrow.
2
X
Pull tightening belt
direction of arrow until the cargo net is
pulled tight.
X
After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
into cargo tie-down ring
1
by the loose end in
3