Mercedes-Benz 2009 R-Class Operator's Manual page 218

Controls in detail
Loading and storing
X
Rolling out blind: Pull blind on handle
across the cargo compartment.
X
Guide blind into mounts
2
X
Rolling up blind: Disengage blind and
guide retraction by its handle 1.
Removing and installing blind
Blind installed behind second-row seats
Release button
1
Blind
2
X
Removing: Roll up blind 2.
X
Push release button 1.
X
Pull blind to the left until it engages.
2
216
X
Installing: For installation behind second
1
row seats, install the blind extensions
( Y page 217).
and release.
! For installation behind third-row seats,
the blind extensions must not be installed.
Otherwise, blind could be damaged.
X
Remove the mount covers in the side trims
of the third seat row when installing roller
blind behind the second-row seats.
2
Mount cover behind second-row seats
X
Press on cover at its lower edge as
indicated by arrow.
The cover's upper edge flips up.
X
Remove cover by pulling its upper edge out
of side trim in direction of arrow.
i To avoid loss of the covers, keep them in
a safe place while not in use, e.g. the glove
box.
X
Make sure release button
1
the roller blind handle ( Y page 215) is to
the rear before inserting the roller blind.
X
Place left side of blind in left mount.
2
X
Position right side of blind
2
mount.
X
Press release button and guide blind
1
into mount.
2
X
Make sure the cargo compartment cover
blind is securely fastened.
faces up and
over right