Time/Date; Outside Temperature - Mercedes-Benz 2009 M-Class Operator's Manual

Controls in detail
Control system
X
Press button or
æ ç
speedometer unit to Km or Miles.
Selecting language
X
Move the selection marker with button
to the Instrument
or
æ ç
Cluster submenu.
X
Press button or repeatedly until
j k
the message Language appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button or
æ ç
language to be used for the multifunction
display messages.
154
to set Selecting display (digital speedometer or
outside temperature) for status indicator
X
Move the selection marker with button
or
æ ç
Cluster submenu.
X
Press button
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button
desired setting.
to select the
The selected display is then shown
continuously in the status indicator (lower
display).
The other display now appears in the
Standard display menu (
to the Instrument
or repeatedly until
j k
or to select the
æ ç
Y page 144).
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
submenu to change the time and date display
settings.
The following functions are available:
Setting the time ( Y page 154)
R
Setting the date ( Y page 155)
R
If your vehicle is equipped with the COMAND
system and navigation module, see separate
COMAND system operating instructions for
information on how to set the time and date.
Setting the time
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
X
Move the selection marker with button
to the Time/Date submenu.
or
æ ç
X
Press button or repeatedly until
j k
the message Clock Set Hour or Clock
Set Minute(s) appears in the
multifunction display.
The selection marker is on the current
setting.