Assembling Your Vacuum Cleaner - Vax U85-ACLG-BA User Manual

Getting started

Assembling your vacuum cleaner

CAUTION: The motor is contained in the dirt container lid, always make sure the pre-motor filter is correctly fitted before
using the vacuum cleaner. Loss of suction may be experienced if the filter insert is not removed before use.
Press the dirt container
release button. Pull and
remove the dirt container
off the vacuum cleaner.
Make sure the tab on the
pre-motor filter is visible
when re-fitting the pre-motor
filter and assembly into the
dirt container.
Fit the battery onto the
vacuum cleaner (below the
dirt container). The battery
will click into position when
correctly fitted.
Lift the handle on the
pre-motor filter assembly.
Remove the filter assembly
from dirt container.
Tilt clean dirt container
and line up onto main
body of vacuum cleaner.
Push dirt container back
until it clicks into place.
The filter insert is attached
to the pre-motor filter under
the filter assembly. Pull and
remove the filter insert.
Push the handle into
the body of the vacuum
cleaner. The handle will
click into position when
correctly fitted.